Cabinet Automatic HFC-227ea Fire Suppression System with Zero ODP and ≤10s Discharge Time FM200 Fire Extinguishing System

The Cabinet Automatic HFC-227ea / FM200 (Heptafluoropropane) Fire Suppression System uses a solenoid valve as its starting mechanism and features an elegant appearance design. The cylinder is housed within a cabinet, and for different protection zones, cylinders of varying sizes can be matched according to the zone volume — helping to reduce the occupied floor area.

The system can be assembled according to different zone volumes, extinguishing agents, and starting modes. Each unit is an independent set offering flexible installation and a clean appearance. Because no dedicated cylinder room is required, the unit can be installed directly within the protection zone, making it handy and easy to relocate.

The automatic HFC-227ea / FM200 fire extinguishing system integrates fire extinguishing, automatic control, and fire detection into a single modern intelligent automatic fire extinguishing device.

HFC-227ea / FM200 (Heptafluoropropane) is a colorless, tasteless, non-conductive gas with no secondary pollution. It belongs to the class of clean extinguishing agents and has an ozone-depleting potential (ODP) value of zero.

• Clean agent with low toxicity
• Excellent electrical insulation properties
• High fire extinguishing efficiency
• Currently an ideal substitute for halon extinguishing agents

This system is suitable for a wide range of sensitive and high-value environments, including:

• Electronic computer rooms and data processing centers
• Telecommunications facilities and process control rooms
• Expensive medical equipment and industrial equipment
• Libraries, museums, and art galleries
• Clean rooms and anechoic chambers
• Emergency power facilities and flammable liquid storage areas

It is also ideal for locations where fire is likely to occur, such as:

• Paint-spraying production lines and aging electrical equipment
• Rolling machines, printing machines, and oil switches
• Oil-immersed transformers and melt impregnating tanks
• Large generators and drying equipment
• Cement production processes involving pulverized coal
• Ship engine rooms and cargo holds

A complete system consists of two parts: the extinguishing device (shown in the photo) and the electrical elements.

One set of the cabinet-type FM200 fire suppression device is formed by the following components:

• FM200 agent
• FM200 cylinder
• Hoop
• Cabinet
• Container valve
• Solenoid actuator
• Flexible hose (high-pressure hose)
• Nozzle(s)
• Pressure switch

1. The volume of the protected zone must not exceed 1600 cubic meters, and the proportion of the protected zone must be smaller than 500 square meters.
2. If problems occur, users should not attempt to repair or touch the system themselves. The best solution is to contact us, describe the problem, and wait for our professionals.
3. Users should follow the routine check schedule that we provide.
4. Unless everything is in its proper position, the cover of the small ball valve must not be left unclosed.