90L Cylinder 19kg Capacity 15MPa Working Pressure IG541 Inert Gas Fire Suppression System and Inergen Fire Suppression System

The IG541 Inert Gas Fire Suppression System is a clean gas fire suppression solution utilizing an IG541 mixture gas composed of 52% nitrogen, 40% argon, and 8% carbon dioxide. This extinguishing agent is colorless, tasteless, non-toxic, and non-conducting, leaving no residue or pollution after discharge. With an Ozone Depletion Potential (ODP) of zero, it is an environmentally friendly gas suitable for extinguishing fires, particularly in locations where electrical fires are likely to occur.

Combined with the extinguishing device and electronic accessories, the entire system can be actuated automatically. It monitors the protected area through detectors and activates the extinguishing device via a solenoid actuator, achieving full automation. This eliminates the risk of an unnoticed fire and reduces the cost of employing personnel to supervise the protected area.

The system also supports management of multiple zones through distributing valves, allowing a single system to protect multiple areas. The agent is discharged only into the zone where the fire occurs, ensuring efficient and rapid fire suppression. A small room should be reserved as storage space for the complete system.

The IG541 Inert Gas Fire Suppression System is suitable for protecting critical facilities and spaces, including:

• Computer rooms
• Telecommunication rooms
• Transformer rooms
• Electrical switch and distribution rooms
• Generator rooms
• Leaching tanks
• Drying equipment
• Paint spraying booths
• Electrical instrument rooms
• Control centers
• Libraries and archives
• Treasure troves of cultural relics

Each system is first packed with polyfoam and then placed into a wooden case. Depending on customer requirements or safety regulations, goods can also be secured on a pallet for transport.

• Versatile fire coverage: Suitable for all classes of fire except metal fires, and leaves no residue or pollution after extinguishing.
• Asset protection: Specifically designed for critical assets and equipment, causing no damage to property. A cost-effective choice for fire suppression.
• Rapid discharge: The system discharges all agent in under 10 seconds, achieving rapid flooding of the protected area for efficient fire suppression.
• Built-in evacuation delay: A time-delay mechanism of approximately 2 minutes provides sufficient time to evacuate personnel from the hazardous area when a fire occurs.
• Multi-zone protection: A single system can protect multiple zones, delivering significant cost savings for large facilities with multiple protected areas.