15MPa Working Pressure Inert Gas Fire Suppression System with 80L Cylinder Volume for Enclosed Flooding IG541 Fire Suppression System

The IG541 Fire Suppression System is a working-pressure 15 MPa inert gas fire suppression solution. The IG541 mixture gas consists of 52% nitrogen, 40% argon, and 8% carbon dioxide. It is colorless, tasteless, non-toxic, non-conducting, and a pure "green" gas that leaves no residue or pollution after extinguishing. Its Ozone Depletion Potential (ODP) is zero, making it an environmentally friendly extinguishing agent. Because of these characteristics, it is well suited for special locations where electrical fires are likely to occur.

Combined with the extinguishing device and electronic accessories, the entire system can be actuated automatically. It monitors the protected area through detectors and can start the extinguishing device via a solenoid actuator automatically, achieving full automation. This eliminates the risk of a fire going unnoticed when no one is present and reduces the cost of employing personnel to supervise the protected area.

The system also supports management of multiple zones. A single system can protect multiple zones through distributing valves, allowing the system to target different protected zones alternately. The agent is discharged only into the zone where the fire occurs, making fire suppression highly efficient and fast. Note that a small room should be reserved as storage space for the entire system.

Suitable for a wide range of critical and electrical environments, including:

• Computer rooms and telecommunication rooms
• Transformer rooms and electrical switch and distribution rooms
• Generator rooms and control centers
• Leaching tanks and drying equipment
• Paint spraying booths and electrical instrument rooms
• Libraries, archives, and treasure troves of cultural relics

Goods are always packed with polyfoam first and then placed into a wooden case. When required to meet customer or safety requirements, a pallet can also be made for the goods.

• The IG541 agent can be used for all classes of fire except metal fires. It is a clean agent that leaves no residue or pollution after extinguishing.
• The IG541 extinguishing system is specially suited for critical assets and devices, causing no damage to property. It is a relatively cost-effective and reliable choice as a fire suppression system.
• The system is highly efficient at protecting property. It includes an extinguishing device that discharges all agent in a short time — typically under 10 seconds — achieving full flooding of the protected area.
• A time-delay mechanism of approximately 2 minutes provides enough time to evacuate people from the hazardous area when a fire occurs.
• Multiple zones can be protected under the control of a single system, saving significant cost for large facilities with multiple zones.