|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||5 sets|
|Packaging Details:||Plywood case|
|Delivery Time:||10-15 working days after payment or receipt of L/C|
|Payment Terms:||L/C, , D/P, T/T, Western Union, Paypal, Credit card|
|Supply Ability:||200 sets per week|
|Storage Pressure:||2.5Mpa||Capacity Of Agent:||3kg Fm200|
|Zone Management:||Single||Pattern Of Extinguishing:||Enclosed Flooding|
|Standard Of Examination:||GB25972-2010||Max Length Of Detecting Tube:||20m|
3kg Agent Fire Detection Tube,
Fire Detection Tube For Power Plants
3Kg Fm200 Fire Extinguisher Tube With GB25972-2010 Standard
|1||Type||Fm200 direct type|
|4||Max working pressure||4.2Mpa|
|6||Density of unit volume||0.7kg/m3|
|7||Max length of detecting tube||20m|
|8||Quantity of agent||3kg|
To detect fires, this device uses a pressurized fire trace tube that is connected to an extinguishing agent store. As an extinguishing agent for this device, you can use carbon dioxide or HFC-227ea/FM200.
Normally, it would be designed to support both direct release and indirect release discharge modes. The system is activated by the fire trace when a fire starts, and an extinguishing agent is then released through the fire trace tube. It's called a straight release. Another technique, which we call "indirect release," makes advantage of the fire trace tube to discharge an extinguishing substance right away after it detects a fire.
The fire trace extinguishing device is an effective remedy for the lack of fixed equipment. because it can be used in places where it is difficult to install fire alarm systems, pipes, or nozzles, such as small spaces or odd conditions.
Power plants, communications, broadcasting, petrochemical, railway ans so on system.
Due to its soft qualities, the fire detecting tube can be fixed wherever that a fire can easily occur. As a result, when there is a fire in the cabinet, it might spread swiftly and damage the fire detecting tube. The air pressure changes when the fire detection tube breaks, which makes the fire agent emerge and spray out of the hole where it broke to put out the fire. Users are simultaneously informed of the existence of a fire and asked to check it out and refill the system by the small alarm bell that rings on top of the fire extinguisher.
There are no electrical parts or pipe fittings necessary to create a system for this extinguishing device. Perhaps it even functions as a fire suppression system.
The direct type fire detecting tube fire suppression system consists of a cylinder, a fire detecting tube with a maximum length of 25 meters, a container valve, and two distinct types of agents—co2 and fm200.
With the addition of a release tube, the components of the indirect type fire detecting tube fire suppression system are the same as those of the direct type. This method only employs the fire detecting tube for the detecting function, necessitating the inclusion of a release tube, in contrast to the direct type, where the fire detecting tube can be used for both detecting and releasing.
The fire detecting tube fire suppression device has the following advantages:
1. Easy transportation and installation. The only thing left to do after installing the cylinder is to install the detecting tube around a potential source of fire because this system integrates fire fighting and alarm function together and does not require matching electrical elements and pipe fittings.
2. The manual start mode. The system may be turned on without any power. The working principle of this device relies on internal storage pressure rather than an external force to activate it. The agent will release after the fire breaks the sensing tube.
3. Not much room is occupied. Instead of protecting a protected zone, this approach is more suited for securing a system like a communications network. The cylinder is fixed to the outside cabinet and won't take up much space.
Guangzhou Xingjin Fire Equipment Co., Ltd., a company that plays a significant role in communication between China and the rest of the globe, is situated in this city and is surrounded by excellent transportation and a lovely environment. We are a manufacturer, and we focus on the research and development of HFC-227ea (FM200) products with the help of our experienced and qualified staff, which includes the program design team, the skilled installation team, the quality detecting team, and the after-sale service team. These days, many of our well-known FM200 products are in use, including the automated FM200 fire extinguisher (ceiling mounted style), the cabinet type FM200 fire suppression system, the pipe network FM200 fire suppression system, the fire detecting tube suppression system, and the automatic fire suppression tube.