|Place of Origin:
Payment & Shipping Terms:
|Minimum Order Quantity:
|Plywood case,Paper carton
|10-15 working days after payment or receipt of L/C
|L/C, T/T, D/P, Western Union,Paypal,Credit Card,Debit Card
|3,00 set per month
|Pattern Of Extinguishing:
|Volume Of Cabinet:
|Capacity Of Cylinder:
|Standard Of Examination:
180L Hfc227ea Fire Suppression System,
High Durability Hfc227ea Fire Suppression System
180L Type Hfc227ea Fire Suppression System With Multiple Zones Controlled
180L Type Hfc227ea Fire Suppression System High Durability For Effective Protection
|max working pressure
Fm200(htc-227ea) is a kind of colorless and tasteless and non-corrosive and electricity-insulating gas without residue and pollution after extinguishing. And ODP of it is zero. It is a friendly-environment gas to be used for extinguishing. Also, because of such feature, it can be used in special place where electrical fire is easy to happen.
Combined with extinguishing device and electronic accessories, the whole system can be actuated automatically. It can monitor the situation of protective region through detectors and then it can also start the extinguishing device through solenoid actuator automatically. So the whole system can achieve automation totally. Therefore, it can avoid that there is no one who notice the fire when it happens and also it saves much money for employment to supervise the protective area.
An FM200 fire extinguishing system is a type of gaseous fire suppression system that uses FM200 gas to extinguish fires quickly and effectively. FM200 is a clean agent extinguishing agent that is colorless, odorless, electrically non-conductive, and leaves no residue after discharge. The system is commonly used in critical facilities like data centers, museums, archives, and other areas containing important assets and sensitive equipment or materials where water-based fire suppression systems would cause damage.
The FM200 system comprises of FM200 cylinders, release valves, detection, and control panels, piping, and discharge nozzles. The detection and control panels include heat detectors, smoke detectors, manual call points, and pre-action systems.
When a fire is detected, the FM200 system is activated to release FM200 gas into the protected area, extinguishing the fire by reducing the oxygen concentration to a level where combustion cannot occur. The FM200 gas is distributed through the piping system and nozzles to the protected area, which is designed to provide fast and effective fire suppression with minimal disruption to the protected area, occupants, and assets.
One of the main advantages of the FM200 system is its effectiveness in suppressing fires in just a few seconds after activation. The gas is also safe for use in occupied spaces and leaves no residue, making it ideal for use in areas with sensitive electronic equipment. The FM200 gas is environmentally friendly, with a low global warming potential and no ozone depletion potential.
FM200 fire extinguishing systems are common in high-value asset protection applications, such as data centers, server rooms, archives, museums, and clean rooms. The system is a reliable and efficient solution for fire protection, minimizing production downtime, and protecting high-value assets from fire damage.
Electronic computer room, a data processing center, telecommunications facilities, process control, expensive medical equipment, industrial equipment, library, museum and art gallery, clean room, anechoic chamber, etc.
The place where the fire is easy to happen, like paint-spraying production line, aging-electrical equipment, rolling machine, printing machine, oil switch, oil immersed transformer, melt impregnating tank, tank, large generators, drying equipment, cement production process of pulverized coal, and the ship's engine room, cargo hold, etc.
In terms of description of agent, one of its competent advantages is that it can be used for all kinds of class fires except metal fire. And it is clean agent. There is no residue and pollution after extinguishing.
It is very efficient for you to protect your possession. Since it is a system, it include extinguishing device to put out fire at short time, specially, shorter than 10 second. It means all agent will be discharged in so short time. Then it will be flooding overall. In addition, it has time-delay mechanism. It is around 2 minute. It means when fire happens, there is enough time left to evacuate people from hazardous place.
Different from piped network type of fm200 automatic fire suppression system, it will be simple to install.
Because there is no pipeline installation. If your protective zone is relatively small and there is no multiple zones more than three, it will save much money than the former.
Here is the illustration of working principle to whole system,
Below attached is one mimic diagram of single cabinet type of fm200 automatic fire suppression system,
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
• We have an efficient sales and after sales team to promise slove all client's question in time.
• We provide 8×6 hrs technical support and service.
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the line four and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.