Co2 Direct Type Fire Extinguisher Tube 12.1Mpa Max Working Pressure

Product Description

Co2 Direct Type Fire Extinguisher Tube 12.1Mpa Max Working Pressure

Parameter:

Description:

    Co2 Direct Type Fire Detecting Extinguisher is filled with 6kg Co2 and it is automatic starting , through long detecting tube with gas and pressure inside, it can be an automatic fire extinguisher without any

manual manipulation. It is used in power plants, communications, broadcasting, petrochemical, railway ans so on system.

    Co2 fire detecting extinguisher depends on neither electric starting nor manual starting, so even if there is power cut, the system can still keep in working condition. Users should follow the guidance to install the system. The detecting tube should be fixed at the places that a fire easily happens. Fixing the detecting tube at a right place help putting out the fire in time, because only when the detecting tube is brunt by the fire then the system starts working.

Compositions:

    It does not need more accessories to consist of system. The extinguishing device can automatically put out fire alone. So the composition of this one is just extinguishing device, just one part. It is one kind of special system or extinguisher.

    Here attached below is complete composition of whole system,

Advantages:

    The fire detecting tube fire suppression device has the following advantages:

1 / Convenient installation and transportation. Because this system combines fire fighting and alarm function together, and no needs to match electrical elements and pipe fittings, so after fixing the cylinder on a place, all left to do is fixing the detecting tube around a potential source of fire.

2 / Non-electric start mode. It doesn’t need the power to activate the system. This system’s work principle is using its own storage pressure instead of relying on the outside force activating. When the detecting tube is broken by the fire, the agent will discharge.

3 / Little occupation of space. This system is suitable for protecting a system, like telecommunication system, rather than a protected zone. The cylinder fixes on the outer cabinet, and will not occupy many places

Attentions:

1 / After using, the fire suppression system needs checking and refilling.

2 / The whole fire suppression system needs at least one body check a year. The routine checking item and time can be found in the manual instruction we provide.