News

Home > News >

Company News About High temperature corrosion resistant fire gun

High temperature corrosion resistant fire gun

2025-09-08

This product is a new type of multifunctional fire-fighting equipment made of high-pressure resistant and high-strength materials. The stainless steel gun head adopts the diversion principle design, with large flow, concentrated water flow, long range, multiple functions, and can be used as a multifunctional gun for foam monitors. The flow rate can be adjusted within the range of 20-30L/S according to demand. It is flexible and convenient to operate. The gun body can rotate horizontally, tilt and rotate, and has positioning and locking functions, which are conducive to the operator's evacuation of the scene. It can be equipped on various fire trucks, fire boats, fixed fire gun mounts, towers and fire pipelines.

To use, rotate the water inlet of the nozzle 90° clockwise to connect it to the hose connector of the fire hose (of the same caliber). To disconnect, rotate it 90° counterclockwise. The nozzle is on when the on/off handle is aligned with the nozzle body. Turn the handle 90° clockwise to turn it off. The range and flow rate of the high-speed nozzle can be adjusted by adjusting the angle between the high-speed handle and the nozzle body. Regularly check the gaskets in all sealing areas for integrity and ensure proper sealing. Avoid impacts that could affect normal use. Avoid mixing with acids, alkalis, or other chemicals. Keep away from heat sources to prevent rubber degradation.

Our company produces and sells fire guns of various specifications and models. The specific models are as follows:

Model Parameters	PS20	PS30	PS40	PS50	PS60
Flow(L/S)	20	30	40	50	60
Rated working pressure(MPa)	0.8
Maximum working pressure(MPa)	1.0
Maximum range(m)	≥45	≥55	≥60	≥65	≥70
Horizontal rotation angle(°)	0-360
Maximum elevation angle(°)	70
Minimum elevation angle(°)	-70

The specifications of the foam/water dual-purpose monitor are as follows:

Model Parameters	PL24	PL32	PL40
Flow(L/S)	20	30	40	50	60
Rated working pressure(MPa)	0.8
Maximum working pressure(MPa)	1.0
Maximum range(m)	≥45	≥55	≥60	≥65	≥70
Horizontal rotation angle(°)	0-360
Maximum elevation angle(°)	70
Minimum elevation angle(°)	-70
Foaming multiple	≥6
25% drainage time(min)	≥2.5

Events

News

Cases

Contacts

Contacts: Miss. Anna

Tel: 86--18011936582

Fax: 86-20-31000205

Contact Now

Mail Us

FM200 Fire Suppression System

FM200 Gas Suppression System

Foam Fire Suppression System

FK-5-1-12 Clean Agents

HFC 227ea Fire Extinguishing System

FM200 Pipe Network System

Fire Detection Tube

Rack Fire Suppression Unit

Fire Dampers

Fire Safety Equipments

FM200 Cylinder

FM200 Clean Agents

NOVEC 1230 Fire Suppression System

Inert Gas Fire Suppression System

FM200 Cabinet System

FM200 Hanging System

FM200 Piston Flow System

CO2 Fire Suppression System

lnorganic Fire Roller Shutter

Automatic Fire Suppression Tube

Smoke Extract Fans

FM200 Fire Suppression System

FM200 Gas Suppression System

Foam Fire Suppression System

FK-5-1-12 Clean Agents

HFC 227ea Fire Extinguishing System

FM200 Pipe Network System

Fire Detection Tube

Rack Fire Suppression Unit

Fire Dampers

Fire Safety Equipments

FM200 Cylinder

FM200 Clean Agents

NOVEC 1230 Fire Suppression System

Inert Gas Fire Suppression System

FM200 Cabinet System

FM200 Hanging System

FM200 Piston Flow System

CO2 Fire Suppression System

lnorganic Fire Roller Shutter

Automatic Fire Suppression Tube

Smoke Extract Fans

High temperature corrosion resistant fire gun

News

Cases

FM200 Fire Suppression System

FM200 Gas Suppression System

Foam Fire Suppression System

FK-5-1-12 Clean Agents

HFC 227ea Fire Extinguishing System

FM200 Pipe Network System