180L Low Toxicity FM-200 Fire Suppression System for Electrical Cabinets

Product Description

Low Toxicity Solo Fm-200 Fire Suppression Systems With 180L Storage

Parameter:

Description:

    Fm200(htc-227ea) is a kind of colorless and tasteless and non-corrosive and electricity-insulating gas without residue and pollution after extinguishing. And ODP of it is zero. It is a friendly-environment gas to be used for extinguishing. Also, because of such feature, it can be used in special place where electrical fire is easy to happen.

Applications:

Cabinet-type FM200 fire suppression systems are specifically designed to protect enclosed spaces such as cabinets, small rooms, or localized areas where fire hazards may exist. Here are some common applications of cabinet-type FM200 fire suppression systems:

1. Server and IT Equipment Cabinets: Cabinet-type FM200 systems are widely used in server rooms, data centers, and telecommunication facilities to protect the critical IT infrastructure housed within cabinets. These systems provide targeted fire suppression to safeguard servers, network switches, storage devices, and other sensitive electronic equipment.

2. Electrical Control Cabinets: In industrial settings, electrical control cabinets contain important control panels, circuit breakers, motor controls, and electrical distribution equipment. Cabinet-type FM200 systems can be installed within these cabinets to suppress fires that may be caused by electrical faults, overheating, or short circuits.

3. Chemical Storage Cabinets: Cabinets used for storing flammable chemicals, solvents, or hazardous materials pose a fire risk. Cabinet-type FM200 systems can provide localized fire protection to prevent the ignition or spread of fires within these cabinets, reducing the potential for explosions or chemical reactions.

4. Document Storage Cabinets: Cabinets used for storing valuable documents, archives, or sensitive paperwork can benefit from cabinet-type FM200 fire suppression. This protects the documents from fire damage while minimizing the potential for water damage that could occur with traditional sprinkler systems.

5. Museum Display Cabinets: Museum display cabinets often house valuable artifacts, historical items, or artwork that are susceptible to fire. Cabinet-type FM200 systems can be integrated into these cabinets to provide fire suppression while preserving the integrity and condition of the displayed items.

6. Laboratory Cabinets: Laboratories commonly have cabinets where hazardous materials, chemicals, or flammable substances are stored. Cabinet-type FM200 systems can be installed in these cabinets to suppress fires and reduce the risk of explosions or chemical reactions, protecting both the laboratory environment and personnel.

7. Fume Hoods and Ventilation Systems: Fume hoods and ventilation systems that extract and remove hazardous fumes or gases can be protected with cabinet-type FM200 fire suppression. This helps prevent fires from spreading through the ventilation system and ensures the safety of laboratory or industrial environments.

It's important to consult with fire protection professionals and adhere to local regulations and guidelines when selecting, designing, and installing cabinet-type FM200 fire suppression systems. Proper assessment of the specific fire risks and consultation with experts will ensure effective fire protection for the targeted enclosed spaces.

Competitive Advantage:

1/ Swift response. Since there is no long distance transportation of pipes, so fm200 gas can be directly discharged into protection zone. Meanwhile, its spraying time is less than 8 second. So it will save more time relatively when the fire happens.

2/ Convenient installation. Compared with pipe network system, cabinet system would be relatively simple to conduct installation. After installation of control panels and electric components, left work is just to connect it with one cabinet fire extinguishing device or devices. But one room should not be matched with more than 4 pieces of it because of the limitation of the output current of a control panel.

3/ Lower cost. Obviously, the price would be cheaper than pipe network type for the protection zone which just needs one single cylinder, because there is no need to consider about the expense of pipes and pipe fittings, also the cost of manpower for this part.

Working principle:

    Here is the illustration of working principle to whole system,

Composititons:

   Actually, a complete one set system contains two parts: the extinguishing device(the whole composition is like the photo beside) and electrical elements.

   One set cabinet type fm200 fire suppression device is formed by the following components: fm200 agents, a fm200 cylinder, a hoop, a cabinet, a container valve, a solenoid actuator, a flexible hose(high pressure hose), nozzle(s) and pressure switch.

Company Introduction

Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.


Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the line four and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.