Direct Type Fire Detecting Tube FM200 Fire Suppression Device 4.2Mpa Reasonable Good Price High Quality

Product Description

42kg CO2 Fire Extinguisher for Fire Detected Tube Extinguisher
 
 
Description:
 
A CO2 fire extinguisher is a particular kind of extinguisher that extinguishes fires by using carbon dioxide gas. Due to the fact that it doesn't leave any residue or harm the equipment, this kind of extinguisher is frequently utilized in locations with electrical equipment or volatile substances.
 
By displacing the oxygen that feeds the fire, the CO2 fire extinguisher effectively suffocates it. When the extinguisher is activated, CO2 gas from a high-pressure cylinder inside the extinguisher is expelled through a nozzle.
 
The use of CO2 fire extinguishers on Class A fires (fires containing typical flammable materials like wood, paper, or cloth) is not advised since they lack the cooling impact necessary to prevent the fire from re-igniting. They work best on Class B and Class C fires, which involve electrical equipment and combustible liquids like gasoline, oil, or grease.
 
 
Parameter:
 

 
Components:
 
This extinguishing device does not require pipe fittings or electrical components to form a system. It might even be an actual fire suppression system.
 
A cylinder, a fire detecting tube with a maximum length of 25 meters, a container valve, and two different types of agents—co2 and fm200—make up the direct type fire detecting tube fire suppression system.
 
The components of the indirect type fire detecting tube fire suppression system are identical to those of the direct type with the addition of a release tube. Unlike the direct type, where the fire detecting tube can be used for both detecting and releasing, this system only uses the fire detecting tube for the detecting function, necessitating the addition of a release tube.
 
Advantages:
 
The following benefits apply to the fire detecting tube fire suppression system:
 
1. Easy transportation and installation. The only thing left to do after installing the cylinder is to install the detecting tube around a potential source of fire because this system integrates fire fighting and alarm function together and does not require matching electrical elements and pipe fittings.
 
2. The manual start mode. The system may be turned on without any power. The working principle of this device relies on internal storage pressure rather than an external force to activate it. The agent will release after the fire breaks the sensing tube.
 
3. Not much room is occupied. Instead of protecting a protected zone, this approach is more suited for securing a system like a communications network. The cylinder is fixed to the outside cabinet and won't take up much space.
 
Certificate
 
Environmental Management System Certificate
Occupational Health and Safety Management System Certificate
Quality Management System Certificate
Certificate of China Compulsory Product Certification
 
 
Packages
We always pack it with polyfoam first and then put it into a wooden case. Sometimes, in order to meet with customers or the safety requirement, we will make a pallet for the goods.
 
 
Company Introduction
 
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.

 
After-Sale Service
 
• We have an efficient sales and after sales team to promise slove all client's question in time.
• We provide 8×6 hrs technical support and service.
 
 

FAQ:

Q1: Are you a manufacturer or a trading company?

A1: We are a manufacturer.

Q2: Is OEM products available?

A2: Yes, we welcome your own design and drawing.

Q3: Where is your factory? Can I visit it?

A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.

Of course yes. We always welcome and wait for your visit.

Q4: How can I get to your factory?

A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the fourth line and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.